Description
ALGIGONE is dry powdered concentrate, which is mixed with water, and applied to building surfaces so mold, mildew, mosses and lichens microbiological growth can be removed using high-pressure water. ALGIGONE works quickly, and, even, the heaviest growth can be easily removed using it. ALGIGONE renews the appearance of mold & mildew covered building exteriors, roofs, walks, patios, drives and decks and other surfaces, making them look like new.

Features
Convenient dry concentrate formula is economical too use. Compared to liquids, it is easier to store, costs less to ship and has a longer shelf life. When mixed, ALGIGONE readily dissolves in water, and because it is engineered to be fast acting, their is no long waiting period before rinsing.

Easy to Use
ALGIGONE does the work removing mold & mildew. After mixing, all it needs to do is be applied, given time to work and rinsed. ALGIGONE begins working immediately when applied, and surfaces are usually ready to be rinsed off in only 5 to 10 minutes.

Technical Information
Appearance/Odor: Dry granular white powder/Very strong chlorine odor.
Packaging: Available in 5 gal plastic pails containing 40 lbs of material.
Coverage: Depending on how heavy the growth and the porosity of the surface being treated, between 250 and 500 sq. ft. per gallon of mixed product can be expected.
Storage: Keep in sealed container and store in a cool well ventilated area away from combustibles.
Shelf Life: In unopened containers, approximately two years.

Precautions
ALGIGONE damages aluminum and plants. Cover any aluminum to protect it, using EZKleen’s Peel Clean Plastic Strippable Coating or thick plastic film and plastic tape, and protect vegetation by covering it with plastic sheeting. Other adjacent surfaces should be wet down with water, and if ALGIGONE contacts them, they should be immediately rinsed.

Application
1) Mix ALGIGONE concentrate with warm water to make desired amount of product. After completely dissolving, solution is ready to be used.

2) Prewet treated surfaces with water, and then apply ALGIGONE mixture using low-pressure spray. A pump up sprayer or electric prep pump, operated with a saturation nozzle, is used to apply the material in a wet soaking type fashion. Airless sprayers are not recommended because they atomize solutions.

3) Allow time for growth to turn brown and rinse. This usually takes 5 - 10, and the easiest way to rinse is with a pressure washer. If one is unavailable, surfaces can be scrubbed with a stiff bristled brush and then rinsed. ALGIGONE mixture is designed to be rinsed off after it has completed working, and it should never be allowed to dry on surfaces.

Flatwork
A power-painting roller can be an ideal way to apply ALGIGONE on walks, driveways, patios, plazas or other large flat surfaces. Units can be fitted with large commercial size rollers and then mounted on extension handles. This allows users to rapidly apply material without wasting a drop and eliminating all overspray.

Sealing
After being removed from masonry, mold and mildew can be prevented from reoccurring by sealing stone, brick and concrete surfaces with EZKleen’s Clear Cladding formula.

Limitations
Though ALGIGONE effectively removes mold and mildew, it is incapable of deep cleaning masonry surfaces. In the event embedded dirt and grime are affecting the appearance of stone & brick surfaces, EZKleen 100 Stone Cleaning Formulations can be used to clean them and make them look like new.

Safety
A dust mask should be worn to prevent inhaling dust while mixing. Wear rubber gloves, safety goggles, and ventilate enclosed areas when handling ALGIGONE. Keep off clothing, and if ALGIGONE gets on skin, rinse thoroughly with water. If it gets into eyes, rinse them with water for 15 minutes and see a physician. ALGIGONE is a chlorinated product, and it can release poisonous gas if mixed with some cleaning products. See Material Safety Data Sheet for more detailed hazard evaluation and safety information.

Environmentally Safe
ALGIGONE is biodegradable, contains no phosphates and readily deactivates after application. When used properly, it poses no threat to the environment. Dispose of all wastes safely according to federal, state and local regulations

Notice: The information contained herein is based on our own research and the research of others, and it is provided solely as a service to users. It is believed to be accurate to the best of our knowledge. However, no guarantee of its accuracy can be made, and it is not intended to serve as the basis for determining this product's suitability for use in any particular situation. For this reason, purchasers are responsible to make their own tests and assume all risks associated with using this product.