Concrete and Stone Cleaning and Sealing System |
||
| EZKleen is the only option we know of for restoring stone and concrete surfaces to their original condition that does not harm the stone surfaces. Current solutions involve either acid etching, which eats away the outside layer of concrete in order to remove impurities or involves high water pressure or abrasive blasting which also erodes the outside of the stone leaving your valuable stone surfaces raw, exposed and damaged. The EZKleen approach is to penetrate the pores and release trapped impurities inside the stone surfaces leaving the original masonry surface clean, hard and intact. Here are some of the uses of the EZKleen restoration system: | ||
|
BEFORE
|
AFTER
|
|
|
Not
only have the impurities been removed but the stone has been sealed
so that this surface will never have to be deep cleaned again. EZKleen
deep cleans limestone, concrete, brick, marble and all stone surfaces.
Likewise; drive through areas that collect oil, gasoline and other impurities are prime targets for the EZKleen restoration system. |
||
|
BEFORE
|
This car wash was packed with dirt, grease, oil, gas, soap and waxes. After applying EZKleen it was washed and then sealed so that it will never have to be deep cleaned again. The yellow striping is a unique coating that will never fade, peel, chip or flake and will not come off unless the top layer of concrete is removed. This Fortune 500 Company had tried every major coating they could and had no success until using the EZKleen stone restorative process. Let us know if EZKleen can help you enhance your image and preserve your investment. |
AFTER
|
For More Information Contact:
1-877-EZKleen
(395-5336) |