Concrete Preparation System• Don’t shot-blast your concrete floor• Don’t acid-etch your concrete floor•
Reduce preparation time and costs by 60-80%
|
|
 |
Traditional concrete floor preparation involves removing a layer of the concrete surface by either scarifying, shot blasting or acid etching the concrete in order to create a solid mechanical bond. EZKleen has no acids and does not harm the outer layer of concrete in any way, yet it opens up the pores, removes impurities and creates an excellent mechanical bond for the concrete coating to be applied. EZKleen speeds up application preparation time and is safer for the applicators and the environment. Reduce application time and costs by 60-80% and have a great, long lasting application! |
STEP
#1 – CLEANUP |
|
 |
EZKleen #1 was applied after pressure washing the concrete substrate. The EZKleen was left on the surface and then pressure-washed again. As can be seen to the left; years and years of accumulated dirt and grime were completely removed with EZKleen #1, allowing a strong mechanical bond for the applying of the coating. Most coating applications fail because of poor surface preparation but EZKleen eliminates that problem. Stop damaging concrete in order to improve its beauty. EZKleen cleans without damaging concrete! |
STEP
#2 – APPLY PROTECTIVE COATING |
|
 |
Surface preparation time has been reduced by 60-80% by using the EZKleen technology as opposed to traditional methods of surface preparation. Environmental hazards of dust, particles and high pressure blasting techniques were avoided. EZKleen is safer for the applicator, for the end user and for the environment. Reduced preparation time means reduced application costs. Contractors can do the job faster, safer and more economically with the EZKleen concrete preparation system. |
For More Information Contact:
1-877-EZKleen
(395-5336) |